Ultrasonic Bench Cleaner

Ultrasonic bench cleaning is a process that uses ultrasound to agitate the fluid. The ultrasound can be used with just water but use of appropriate solvent for the object to be cleaned and the type of soiling present enhances effect, Cleaning normally lasts between 3 to 20 minutes depends on the object has to be cleaned.

These cleaners are used to clean many different objects including scientific samples, lenses and other optical parts, surgical instruments, machined parts, fuel injectors etc.,

Process characteristics:

Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure waves to agitate a liquid.The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics.This action also penetrates blind holes, cracks, and recesses. 


Ultrasonic energy introduced into a solution causes alternating patterns of low- and high-pressure phases. During the low-pressure phase, bubbles, or vacuum cavities form, in the subsequent high pressure phase these bubbles implode violently. This is called cavitation.


Cavitation provides an intense scrubbing action that leads to unsurpassed cleaning speed and consistency, additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.
As a result, Ultrasonic cleaning is one of the most effective and efficient methods,
In general, the enhanced transducers ensure uniform cleaning throughout the tank by sweeping the ultrasonic frequency varies from 20-40kHz,
                We can use it for cleaning a wide array of parts without abrasive contact materials on your part’s surface.

Leave a Comment

Your email address will not be published. Required fields are marked *